Simulation Control Parameters

Integration step size in measure of the undulator period length.

Defines the total integration length. If the undulator length is shorter than ZSTOP or ZSTOP is zero or negative, the parameter is ignored and the integration is performed over the entire undulator.

Flag for orbit correction. For any non-zero value the offset due to the wiggle motion is taken into account for the interaction between electron beam and radiation field. The correction is not included in the output values for the beam centroid position.

If set to a non-zero value the energy loss due to spontaneous synchrotron radiation is included in the calculation.

If set to a non-zero value the increase of the energy spread due to the quantum fluctuation of the spontaneous synchrotron radiation is included in the calculation.

Externally applied energy loss of the electron beam.

Used for backward compatibility of the input decks. Some parameters might change their behavior for older versions of GENESIS 1.3. The current version is 1.0.